Thanks:
0
Likes:
0
Dislikes:
0
-
pro 65 09.370 error wont clear
Can't clear the 09.370 code.
Any help?
-
Senior Tech
250+ Posts
- Rep Power
- 33
Re: pro 65 09.370 error wont clear
Fault Code, 09-370, indicates that the Transfer HVPS fuse is open or that the power supply is on in standby. The Transfer Fault Monitor signal is High when the Transfer Enable should be Low.
-
Re: pro 65 09.370 error wont clear
Thank you. This I know. There is no fuse on that board, but it is not putting out proper voltage.
[
QUOTE=Enzo;285005]Fault Code, 09-370, indicates that the Transfer HVPS fuse is open or that the power supply is on in standby. The Transfer Fault Monitor signal is High when the Transfer Enable should be Low.[/QUOTE]
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks