Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    WCPro 35 NC software

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49

    WCPro 35 NC software

    Hi folks,
    Trying to reload NC software on Xerox WCPro 35. Tried with 03.98.50 / 04.98.50 but when I have to choose kfs*.tgz file there is no option to do this! Or get message request timeout. Changed crossover cable, tried all options with selecting folder...
    Just saw label on NC box: SW: V3.84.16 LEANDER. If anyone have this version please share.
    Thanks in advance


  2. #2
    Service Manager 1,000+ Posts
    WCPro 35 NC software

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,233
    Rep Power
    71

    Re: WCPro 35 NC software

    What means:
    "Tried with 03.98.50 / 04.98.50 but when I have to choose kfs*.tgz file there is no option to do this!" ?
    You have only .dlm file ?

  3. #3
    Technician
    Join Date
    Mar 2011
    Posts
    29
    Rep Power
    27

    Re: WCPro 35 NC software

    disable firewal, antivirus. You must use the correct alterboot for WCP35... And the SW 3.98.50 is ok. You must use a null modem serial cable and crossover cable....
    I can upload altboot files and SW when you want...

  4. #4
    Service Manager 1,000+ Posts
    WCPro 35 NC software

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49

    Re: WCPro 35 NC software

    Quote Originally Posted by fogra27 View Post
    disable firewal, antivirus. You must use the correct alterboot for WCP35... And the SW 3.98.50 is ok. You must use a null modem serial cable and crossover cable....
    I can upload altboot files and SW when you want...
    I tried everything. Tried couple versions of altboot. But it stacks when it should transfer files???
    Which version of altboot do you use?

  5. #5
    Service Manager 1,000+ Posts
    WCPro 35 NC software

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49

    Re: WCPro 35 NC software

    Quote Originally Posted by adriansto View Post
    What means:
    "Tried with 03.98.50 / 04.98.50 but when I have to choose kfs*.tgz file there is no option to do this!" ?
    You have only .dlm file ?
    Hi adi, I was trying to reload software with altboot, following next procedure


    1. At the "Main Menu" select option 3 (Ethernet/Serial Boot) but do not press enter.
    2. When the file transfer window opens, click the browse button and locate the Serial Boot Code File sbcv*.bin, select open, then upload. The file can be found at- Inst/*(s/w level)/NC/diskimg/sbcv*bin
    3. At the "Ethernet/Serial Boot Menu" select option 2 (Download Lynx Mini Kernel) but do not press enter.
    4. When the transfer window opens, click the browse button and locate the Mini Kernel File ekp*.os, select open, then upload. This will take approximately 5-10 minutes to upload.
    5. Once the upload has completed a browse for folder window will open. If you cannot see the browse box, press alt tab to bring it into view. Browse to the folder named NC in the folder containing the software version you wish to load, select the NC folder then click OK (Do not open the folder, just select it with a single left click).


    1. You should now see the following- ************************************************** ****************
      We are about to setup the network configuration for this machine.
      These values are used to install the network driver, and will
      only be active during the installation process.
      ************************************************** ****************

      Proceed? [Yn]
    2. When asked whether to proceed, hit Y, then Enter. The Network Controller will then assign itself an IP Address. This will be displayed on Bottom Right hand corner of Altboot window. Warning If the IP address is not displayed, and the text
      1) Set ESS IP Address
      2) Continue
      Enter option:
      appears the Altboot has failed. A possible cause is a problem with PWS network settings. Go back to PWS Configuration and check settings. Close and reopen the Altboot window and go back to step 8.

    3. You should see ************************************************** ****************
      About to determine the appropriate KFS image to download.
      ************************************************** ****************

      Proceed? [Yn] y
      When asked whether to proceed, hit Y, then Enter.
    4. At the set ftp settings menu, Enter option 4) Continue, then Enter.
    5. The Mini Kernel File System file for your software set should now be displayed. Select the kfs*.tgz file The Network file transfer status window will appear and display the status of the transfer. Once the transfer is complete the transfer status window will close.


    This is the stage when files should be transferred via ethernet, but nothing happens!

  6. #6
    Service Manager 1,000+ Posts
    WCPro 35 NC software

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,233
    Rep Power
    71

    Re: WCPro 35 NC software

    Sorry Bojan but your pws laptop don't communicate with machine.
    Set 192.168.0.2 ip address of laptop.
    In NC folder of 03.98.50.000 firmware you have another two folders:
    diskimg folder and upgrade folder. In upgrade folder you have D039850000_00_1.DLM file.
    Reload procedure and this message should don't appears:
    ************************************************** ****************
    We are about to setup the network configuration for this machine.
    These values are used to install the network driver, and will
    only be active during the installation process.
    ************************************************** ****************



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here