did the ip
the message I get is
maximum retransmits exceeded
check communications line
reset machine and /or pws application if necessary
i am using a cross over cable and serial cable with null connector
did the ip
the message I get is
maximum retransmits exceeded
check communications line
reset machine and /or pws application if necessary
i am using a cross over cable and serial cable with null connector
Check again your crossover cable or try with another.
Also take a look at memory simm located in net controller.
May be ekpxxxxxx.os file you have is corrupt. What is the version of the file and what is its size ?
The cross over cable is good
i loaded software on a 7675 two weeks ago
i have tried 3 different software versions and all do the same
do you mean the RAM ?
A few days ago I used to have the same problem. After I turned off the firewall and allow all traffic everything goes ok!
2x corrupt file
First time I ALTBOOT, tried 3x. Called X. They said download software again and use altboot tool in download. It worked!
Is anyone has Altboot software.. Plz advise...Thanks
Bookmarks