You must use 80 Gb for hdd
You can do that id you have proper software
You must use 80 Gb for hdd
You can do that id you have proper software
thank you for the fast reply.
Ok so the size of hdd is 80 - I'll get one ( I already had the 40 so...)
The only reason is that we use this copier as a net printer - no other feature is used so I hoped it won't need a big hdd.
About the software - I cant find altboot on any of the cds that I have - any ideea where I could get it from ?
Thank you again
Send mail at stoadis@gmail.com
Hello! Can you help me? I have altboot version that MBC.
I need that SBC.
Thank you!
Hello,
Please is anybody have NVM file for wc 5645 (*.nvb) with (ser.no.) Costumer lose floppy disk, and battery die.
I don't have on field this type .
igorbirokip@gmail.com
HI All,
I am also stuck on subjected issue. can any one send me same firmware so i can load software through alboot or through software upgrade .
ktxerox@gmail.com
Thanks
Dear bojan I empty my inbox it was full.
You can mail me on ktxerox@gmail.com
Hello friends. I have both versions of machines (SBC and MBC). I'm trying to reload the software by inserting the USB pendrive with "ALTBOOT" folder which contained the files .dlm
on SBC machine it is loaded perfectly.
with mbc the machine does not recognize the pendrive.
how can I reload? thank you
P.S. basically, my problem is that in the network controller does not go over 75%.
Enzo,
I believe you have to use your PWS laptop, start AltBoot program and reload software.
Also connect laptop and NC with ethernet cable and null modem cable.
Bookmarks