xerox wc 7335 touch panel

**johnner66** · 06-10-2012

anyone out there where can i buy the touch panel for the 7335 thanks everyone

**bojans** · 06-10-2012

Try with partsdrop.

**mrizer** · 06-20-2012

We have them new and on exchange. Part number is 848K19761 or 848K19761-EX.

**Exok** · 07-13-2012

If its just the touch screen you need. Do a search for this part # N010-0554-T504.
I use these touch screens as a replacement for all WC 73xx machines as well as 4595.

**kamoro** · 11-20-2012

Originally Posted by Exok

If its just the touch screen you need. Do a search for this part # N010-0554-T504.I use these touch screens as a replacement for all WC 73xx machines as well as 4595.

Hi,
I've noticed that, according to fujitsu tech spec, the touch screen you describe (N010-0554-T504) has the flat located on the left side but in the middle and not a few centimetres from the top as I can see in the one of my Xerox 7345 Touch_Screen.JPG..
Is it possible to use it the same? Do I need to do some particular action before or after installation?
Many thanks and kind regards,
Fabrizio

**Exok** · 11-21-2012

N010-0554-T504 has worked in every WC7328 - WC7346 I've ever serviced. I don't recall if the ribbon cable was in the center or closer to the top. I don't see why it would be in a different place for you than it is for me though.

**kamoro** · 11-21-2012

Originally Posted by Exok

N010-0554-T504 has worked in every WC7328 - WC7346 I've ever serviced. I don't recall if the ribbon cable was in the center or closer to the top. I don't see why it would be in a different place for you than it is for me though.

Ok I'm going to try... any particular operation before changing it?Only calibrating with 0,1,3 holded during switch on?Thanks

**Exok** · 11-29-2012

Originally Posted by kamoro

Ok I'm going to try... any particular operation before changing it?Only calibrating with 0,1,3 holded during switch on?Thanks

Yes, that's the only calibration needed.

**kamoro** · 11-29-2012

Originally Posted by Exok

Yes, that's the only calibration needed.

Yeeeesssssssss!!!!!!!!!
It works perfectly!!!! wonderful...
Many thanks I save a lot of money...
I have bought the touchscreen here, (very very very fast shipping and good price..) and the only difference between the one in the machine and this, is that it's a bit thinner, anyway it fits perfectly.
For instance, the touchscreen has the ribbon cable not in the middle of the left side, has described in the technical drawings, but closer to top (as the original)
I take 20 minutes to change the touchscreen..
Thanks a lot again...

**djwhoo** · 08-01-2013

Originally Posted by kamoro

Yeeeesssssssss!!!!!!!!!
It works perfectly!!!! wonderful...
Many thanks I save a lot of money...
I have bought the touchscreen here, (very very very fast shipping and good price..) and the only difference between the one in the machine and this, is that it's a bit thinner, anyway it fits perfectly.
For instance, the touchscreen has the ribbon cable not in the middle of the left side, has described in the technical drawings, but closer to top (as the original)
I take 20 minutes to change the touchscreen..
Thanks a lot again...

good job