Xerox WC Pro C2128 example

**TEKK09** · 07-26-2012

Has anyone seen this? It only happens on black (the black portion of a color copy looks like the example, and colors are fine). Will installing new developer fix this, or is there a malfunction with the blk dv unit? Thanks

**bojans** · 07-26-2012

Change developer.

**TEKK09** · 08-10-2012

Thanks for the post. I was waiting for anyone else to chime in there. The machine has another minor problem, and the part is not available, so it may get updated instead of fixing. It's still pending. We'll see what happens. But I assume you've seen this and changing developer took care of the problem. That's what I thought but didn't know for sure, so thanks again.

**slybot** · 08-11-2012

Originally Posted by TEKK09

Has anyone seen this? It only happens on black (the black portion of a color copy looks like the example, and colors are fine). Will installing new developer fix this, or is there a malfunction with the blk dv unit? Thanks

would be interested in knowing how just changing the dev goes. I just replace the entire dev unt and dev. In my books something has to be wrong with the dev unit to be causing this; but let us know :-)

**slybot** · 08-11-2012

i have copped this in a few other machines as well (dc II c4300, dcc400 etc) and just replace the complete dev units

**azehnali** · 08-13-2012

no need to change anything
just add a little developer
if you look at the developer housing you will see the same pattern of the mag roll
more that likely the drum caused this effect
you can add developer through the toner feed section
10 min work
more like 5 min

**Tinochka** · 08-14-2012

Very little of developer in black developer housing. Its possible to add any colour of developer. It could be colored for the first, but then it will be ok. Just in case you dont have new developer.

**TEKK09** · 08-16-2012

Thanks for the ideas. I think the customer is considering updating since I've not received the order to repair. That machine is about 10 years old I think. If I have anything further I'll be sure and post it.

**seximibabay07** · 07-10-2017

Originally Posted by TEKK09

Thanks for the ideas. I think the customer is considering updating since I've not received the order to repair. That machine is about 10 years old I think. If I have anything further I'll be sure and post it.

Hello friend, do you have FIRMWARE and WPS Diagnostics tool for WorkCentre Pro C2128?
Best regards;