Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Leodis_UK
    Guest

    Workcentre C35 14-110

    Hi group, I have a workcentre C35 giving a fault code 14-110 "scanner needs service". Any ideas? Thanks.

  2. #2
    Service Manager 1,000+ Posts
    Workcentre C35 14-110

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49

    Re: Workcentre C35 14-110

    There is a fault with CCD PWD.On the upper right corner of this board you can see that it has burned.I usually replace SMD Resistor with 131ohm mark on it and it works for a while.
    Last edited by bojans; 08-11-2012 at 09:24 PM.

  3. #3
    Technician
    Join Date
    Feb 2014
    Posts
    32
    Rep Power
    21

    Question Re: Workcentre C35 14-110

    Quote Originally Posted by bojans View Post
    There is a fault with CCD PWD.On the upper right corner of this board you can see that it has burned.I usually replace SMD Resistor with 131ohm mark on it and it works for a while.
    i have that problem too. when scanner come to end its stuck and knock knocked..
    there is the picture inside of ccd
    photo1.jpgphoto2.jpgphoto3.jpg

  4. #4
    Technician
    Join Date
    Feb 2014
    Posts
    32
    Rep Power
    21

    Exclamation Re: Workcentre C35 14-110

    how can i config CCD bord ?
    look at the flashes
    aas.jpg

  5. #5
    Brian W
    Guest

    Re: Workcentre C35 14-110

    Hi,
    you need to replace the ccd pwb with a new one. It has better resistors on it. Make sure you shim the old one as that is the only way to be sure of getting the new ccd pwb in the correct position.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here