Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Alan Aya
    Guest

    Service Mode WorkCentre 5665/5675/5687

    Goodday everyone.
    I am trying to work on this WorkCentre 5665/5675/5687, can someone guide me on how to access to the service mode of this machine? The machine cannot copy nor print, is there any setting that i need to set? Some setting code will be much appreciated.

    Thank in advance,
    Alan Aya

  2. #2
    Agitating Artificer 250+ Posts CopierTechofOmens's Avatar
    Join Date
    Jan 2009
    Location
    NY
    Posts
    269
    Rep Power
    35

    Re: Service Mode WorkCentre 5665/5675/5687

    What is the error code you are getting?

  3. #3
    Alan Aya
    Guest

    Re: Service Mode WorkCentre 5665/5675/5687

    I am not getting any error code instead i got the message " Copying and Printing are unavailable " on the screen.
    Any kind of help would be appreciated.

    Thank you
    Alan Aya

    Quote Originally Posted by CopierTechofOmens View Post
    What is the error code you are getting?

  4. #4
    Technician
    Join Date
    Sep 2012
    Posts
    20
    Rep Power
    24

    Re: Service Mode WorkCentre 5665/5675/5687

    1. When the machine in ready, press and hold the # key, then press the Access key.
    2. Enter the PIN 1934. Touch the Enter button on the UI.

  5. #5
    Service Manager 1,000+ Posts
    Service Mode WorkCentre 5665/5675/5687

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49

    Re: Service Mode WorkCentre 5665/5675/5687

    After you enter diagnostic go to faults and post error code.

  6. #6
    Alan Aya
    Guest

    Re: Service Mode WorkCentre 5665/5675/5687

    Thank you for the post yesterday.
    I have check the fault codes and below is the fault codes :
    The most recent code is 03-320 - User Interface Data Timeout Error ( It happened 3 times )
    03-360 - Image Output Terminal : 3 Times Retry Fail ( happened once )
    03-410 - Finisher not detected at power On ( happened once )
    03-777 - SIP recovered from an uncontrolled power ( happened twice )
    By looking at these fault code, can you tell which code causes the " Copying and Printing are Unavailable " message and what is the solution?

    Thank in advance
    Alan Aya

    Quote Originally Posted by bojans View Post
    After you enter diagnostic go to faults and post error code.

  7. #7
    Service Manager 1,000+ Posts
    Service Mode WorkCentre 5665/5675/5687

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: Service Mode WorkCentre 5665/5675/5687

    Probably you lost software system.

  8. #8
    Technician
    Join Date
    Sep 2012
    Posts
    20
    Rep Power
    24

    Re: Service Mode WorkCentre 5665/5675/5687

    Could be the following:
    1. LVPS (Power Supply) dead or will be
    2. too much toner contamination on the IOT pwb
    3. above in the ESS pwb

    or finisher pwb

    try to catch an oct or another finisher

  9. #9
    Alan Aya
    Guest

    Re: Service Mode WorkCentre 5665/5675/5687

    Quote Originally Posted by adriansto View Post
    Probably you lost software system.
    If you prediction is true, how can i reload the system software? Infact i got 5 units of these machine, up till now i have already unpack 3 units and all 3 units giving me the same message on the screen. BTW i got this 3 inch diskette attached to the back of the machine, on the diskette is written " Xerox Machine Resident Diskette MRD", do you think that this is the System Software, how do i reload it?

    Thank you.

  10. #10
    Service Manager 1,000+ Posts
    Service Mode WorkCentre 5665/5675/5687

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: Service Mode WorkCentre 5665/5675/5687

    Quote Originally Posted by Alan Aya View Post
    If you prediction is true, how can i reload the system software? Infact i got 5 units of these machine, up till now i have already unpack 3 units and all 3 units giving me the same message on the screen. BTW i got this 3 inch diskette attached to the back of the machine, on the diskette is written " Xerox Machine Resident Diskette MRD", do you think that this is the System Software, how do i reload it?

    Thank you.
    The diskette dont contain software it contain nvm configuration. That is good for you.
    For others informations you can mail me.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here