Guys,

after fitting the ess nvm and mcu nvm pwb's to cure a finisher nvm problem giving slow printing (on Xerox's advice and didn't work) I re-fitted the original pwb's only to find that the network capability has vanished. I have tried everything in the edoc, initialised all the nvm's and the hdd, and reloaded the latest firmware and reloaded the original database. The original problem is the pws software reports a D2 finisher when it's actually a C type until I use a stored database. Once I reload pws it's back to being a D2. AAAAaaaaaahhhggggg . It printed ok with the new nvm pwb's in

Anyone got any ideas? Just getting the printing back would be a start (Bustled fiery X3ety)