WorkCentre Pro C3545: No network scan/email function

[peter3110]

A few weeks ago i have bought a second hand Workcentre Pro C3545 at a auction. The machine is complete with network scanning, email and whatsoever. When i started up the machine, there is only the copyfunction on the display. The configurationreport says the scan to file, scan to email and all is not installed. When i open the back of the machine all the hardware is present including 3 sok's. 1 for fastprinting(45pp/m), 1 for scan2file/email and 1 for ?.
I know the last owner has reloaded a newer softwareversion. I don't know if this is the problem.

So far i have not found any solution.

Anyone have a suggestion on how to get network scanning to work?
Thanks

[adriansto]

Try reload again the software !

[peter3110]

How do i do this and what do i need for this? I did not get any cd or something with software for this machine.

[adriansto]

What software version you have on machine ?

[peter3110]

systemsoftware 0.001.04.052
net controller software 3.04.510.01
UI software 001.04.505
CCM software 01.04.52
IOT software 09.00.03
Finisher software 03.01.03
Scanner software 01.04.00

[adriansto]

I have this version of software but I think your UI software version and Net controller software version do not match the software release 04.520.
I sent you PM.
Tell me your mail to send you a list with the corect version of software.

[cws10]

I have this version of software but I think your UI software version and Net controller software version do not match the software release 04.520.
I sent you PM.
Tell me your mail to send you a list with the corect version of software.

Where can I get the system software level 1.04.512 for this copier, I am currently having issues / not allowing to collate or use staple functions – it currently has version 1.04.511. my direct email: jgarcia@copyworldservice.com - Thanks for your help

[seximibabay07]

Where can I get the system software level 1.04.512 for this copier, I am currently having issues / not allowing to collate or use staple functions – it currently has version 1.04.511. my direct email: jgarcia@copyworldservice.com - Thanks for your help

Hello friend, do you have WPS Diagnostics tool for WorkCentre Pro C2128?
Best regards;