DC 12 oil on edges

[bmt_hr]

Hi. I have a problem whith oil leaking on the edge of fuser an pressure rolls. When paper came out from fuser there is a one inch wide oil streaks on it. Sometimes ther is oil streaks on both side of paper . I try it to remove oil from fuser and pressure rolls by lint free clothes but oil come back. I also noticed that WEB roll is heavily oiled-maybe is problem with this? Can sobody hel me with some suggestion ? thx

[bojans]

First clean oil assembly and replace oil blade.
The best would be to replace oil cleaning assy.
Also check if oil tank is clogged.

[Enzo]

I have too always had problems with oil on that machine. I recommend suggestions from Bojans