Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    AccService 100+ Posts
    Join Date
    Jul 2009
    Location
    San Diego
    Posts
    198
    Rep Power
    0

    Xerox WorkCentre 7120 Factory RESET

    We have customer with this 7120 that picked up this machine from another service provider and they are having problems beyond what can be explained. We are looking to help them out by simply reseating the machine to factory settings.. Looking for either NVRAM initialization or anything that will wipe it clean as NEW. Please let me know how this can be done via Service Mode. Thanks in advance for al l your help

  2. #2
    Field Supervisor 500+ Posts Exok's Avatar
    Join Date
    Jun 2011
    Location
    Edison, NJ
    Posts
    750
    Rep Power
    39

    Re: Xerox WorkCentre 7120 Factory RESET

    Procedure

    1. Enter UI Diagnostic mode ( Accessing UI Diagnostics). Select Initialize NVM. Selections for the following 7 subsystems appear:

      • IOT
      • OUTPUT (Finisher)
      • IISS (IIT/IPS)
      • IISS-Extension
      • Input Device
      • Sys-SYSTEM
      • Sys-USER
      • Fault Counter

      Table 1 displays the areas that are initialized for each section.
      Name Description
      IOT The following NVM locations will be initialized:

      • Chain 740 - links 020 through 419
      • Chain 741 - All
      • Chain 742 - links 055 through 079
      • Chain 744 - All
      • Chain 746 - All
      • Chain 751 - All except links 168 and 364
      • Chain 752
      • Chain 753 - All
      • Chain 760 - All
      • Chain 762 - All
      • Chain 764 - All
      IIT/IPS The following NVM locations will be initialized:

      • Chain 710
      • Chain 715 - links 001 through 017
      SYS-System The following NVM locations will be initialized:

      • Chain 700 - links 006, 065 through 070, 088, 116, 122, 127, 128, 147, 164 through 166, 174, 176 through 181, 197, 208
      • Chain 701 - links 912, 917, 924, 929
      • Chain 720 -link 002
      • Chain 730 - links 00 through 006
      • Chain 770 - links 124, 203
      • Chain 780 - links 065 through 068
      • Chain 785 - links 008, 009
      • Chain 790 - links 003, 004, 099
      • Chain 801 - links 104, 204, 304, 404, 504, 604, 704, 804, 904
      • Chain 802 - links 004, 104, 204, 304, 404, 504, 604, 704, 804, 904
      • Chain 803 - link 004
      • Chain 810 - links 002 through 019, 038 through 127
      • Chain 820 - links 003, 007 through 009, 017 through 019, 024, 026, 027, 029
      • Chain 823 - links 001 through 005, 008 through 011, 030 through 047
      • Chain 830 - links 001 through 004, 084, 085
      • Chain 850 - links 001 through 004, 007, 009 through 012, 015
      • Chain 860 - links 009, 013, 020, 025, 031, 032
      SYS-User All user settable NVM locations in the following chains will be reset:
      Chains 700, 780, 785, 790, 800, 801, 802, 803, 804, 805, 806, 810, 820, 823, 830, 840
    2. Select the subsystem to be initialized and select Start.
      CAUTIONAll NVM for the selected subsystem will be reset to the default values. Any machine-specific, region-specific, or customer-specific information will need to be re-entered. Make sure that this information is available before proceeding.

    3. A confirmation message appears. Select Yes.
    4. A message indicating completion will appear.
    5. Select the Confirm button.

    This completes the initialization. Remember to re-enter any machine-specific NVM data.
    NOTE:
    As-shipped defaults can be re-entered using the Batch Write feature in the PWS Download Tool. Refer to dC351 for details.

  3. #3
    Service Manager 1,000+ Posts
    Xerox WorkCentre 7120 Factory RESET

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: Xerox WorkCentre 7120 Factory RESET

    You need 7120 service software download tool for factory restoring !

  4. #4
    AccService 100+ Posts
    Join Date
    Jul 2009
    Location
    San Diego
    Posts
    198
    Rep Power
    0

    Re: Xerox WorkCentre 7120 Factory RESET

    This will work. Thank you both

  5. #5
    padrino976
    Guest

    Re: Xerox WorkCentre 7120 Factory RESET

    Quote Originally Posted by Exok View Post
    Procedure


    1. Enter UI Diagnostic mode ( Accessing UI Diagnostics). Select Initialize NVM. Selections for the following 7 subsystems appear:
      • IOT
      • OUTPUT (Finisher)
      • IISS (IIT/IPS)
      • IISS-Extension
      • Input Device
      • Sys-SYSTEM
      • Sys-USER
      • Fault Counter

      Table 1 displays the areas that are initialized for each section.
      Name Description
      IOT The following NVM locations will be initialized:

      • Chain 740 - links 020 through 419
      • Chain 741 - All
      • Chain 742 - links 055 through 079
      • Chain 744 - All
      • Chain 746 - All
      • Chain 751 - All except links 168 and 364
      • Chain 752
      • Chain 753 - All
      • Chain 760 - All
      • Chain 762 - All
      • Chain 764 - All
      IIT/IPS The following NVM locations will be initialized:

      • Chain 710
      • Chain 715 - links 001 through 017
      SYS-System The following NVM locations will be initialized:

      • Chain 700 - links 006, 065 through 070, 088, 116, 122, 127, 128, 147, 164 through 166, 174, 176 through 181, 197, 208
      • Chain 701 - links 912, 917, 924, 929
      • Chain 720 -link 002
      • Chain 730 - links 00 through 006
      • Chain 770 - links 124, 203
      • Chain 780 - links 065 through 068
      • Chain 785 - links 008, 009
      • Chain 790 - links 003, 004, 099
      • Chain 801 - links 104, 204, 304, 404, 504, 604, 704, 804, 904
      • Chain 802 - links 004, 104, 204, 304, 404, 504, 604, 704, 804, 904
      • Chain 803 - link 004
      • Chain 810 - links 002 through 019, 038 through 127
      • Chain 820 - links 003, 007 through 009, 017 through 019, 024, 026, 027, 029
      • Chain 823 - links 001 through 005, 008 through 011, 030 through 047
      • Chain 830 - links 001 through 004, 084, 085
      • Chain 850 - links 001 through 004, 007, 009 through 012, 015
      • Chain 860 - links 009, 013, 020, 025, 031, 032
      SYS-User All user settable NVM locations in the following chains will be reset:
      Chains 700, 780, 785, 790, 800, 801, 802, 803, 804, 805, 806, 810, 820, 823, 830, 840
    2. Select the subsystem to be initialized and select Start.
      CAUTIONAll NVM for the selected subsystem will be reset to the default values. Any machine-specific, region-specific, or customer-specific information will need to be re-entered. Make sure that this information is available before proceeding.
    3. A confirmation message appears. Select Yes.
    4. A message indicating completion will appear.
    5. Select the Confirm button.

    This completes the initialization. Remember to re-enter any machine-specific NVM data.
    NOTE:
    As-shipped defaults can be re-entered using the Batch Write feature in the PWS Download Tool. Refer to dC351 for details.

    hello, i'am italian boy, help me! yo have msn or skype? my contact is silvius2001@htmail.com thanks, help me!

  6. #6
    padrino976
    Guest

    Re: Xerox WorkCentre 7120 Factory RESET

    Quote Originally Posted by Exok View Post
    Procedure


    1. Enter UI Diagnostic mode ( Accessing UI Diagnostics). Select Initialize NVM. Selections for the following 7 subsystems appear:
      • IOT
      • OUTPUT (Finisher)
      • IISS (IIT/IPS)
      • IISS-Extension
      • Input Device
      • Sys-SYSTEM
      • Sys-USER
      • Fault Counter

      Table 1 displays the areas that are initialized for each section.
      Name Description
      IOT The following NVM locations will be initialized:

      • Chain 740 - links 020 through 419
      • Chain 741 - All
      • Chain 742 - links 055 through 079
      • Chain 744 - All
      • Chain 746 - All
      • Chain 751 - All except links 168 and 364
      • Chain 752
      • Chain 753 - All
      • Chain 760 - All
      • Chain 762 - All
      • Chain 764 - All
      IIT/IPS The following NVM locations will be initialized:

      • Chain 710
      • Chain 715 - links 001 through 017
      SYS-System The following NVM locations will be initialized:

      • Chain 700 - links 006, 065 through 070, 088, 116, 122, 127, 128, 147, 164 through 166, 174, 176 through 181, 197, 208
      • Chain 701 - links 912, 917, 924, 929
      • Chain 720 -link 002
      • Chain 730 - links 00 through 006
      • Chain 770 - links 124, 203
      • Chain 780 - links 065 through 068
      • Chain 785 - links 008, 009
      • Chain 790 - links 003, 004, 099
      • Chain 801 - links 104, 204, 304, 404, 504, 604, 704, 804, 904
      • Chain 802 - links 004, 104, 204, 304, 404, 504, 604, 704, 804, 904
      • Chain 803 - link 004
      • Chain 810 - links 002 through 019, 038 through 127
      • Chain 820 - links 003, 007 through 009, 017 through 019, 024, 026, 027, 029
      • Chain 823 - links 001 through 005, 008 through 011, 030 through 047
      • Chain 830 - links 001 through 004, 084, 085
      • Chain 850 - links 001 through 004, 007, 009 through 012, 015
      • Chain 860 - links 009, 013, 020, 025, 031, 032
      SYS-User All user settable NVM locations in the following chains will be reset:
      Chains 700, 780, 785, 790, 800, 801, 802, 803, 804, 805, 806, 810, 820, 823, 830, 840
    2. Select the subsystem to be initialized and select Start.
      CAUTIONAll NVM for the selected subsystem will be reset to the default values. Any machine-specific, region-specific, or customer-specific information will need to be re-entered. Make sure that this information is available before proceeding.
    3. A confirmation message appears. Select Yes.
    4. A message indicating completion will appear.
    5. Select the Confirm button.

    This completes the initialization. Remember to re-enter any machine-specific NVM data.
    NOTE:
    As-shipped defaults can be re-entered using the Batch Write feature in the PWS Download Tool. Refer to dC351 for details.

    hello, i'am italian boy help me you have msnor skype? my contact is silvius2001@hotmail.com , help me thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here