WCPro 35 with scanning option

[bojans]

Hi,

Looking for NC software for WCPro 35 with network scanning option.
Anyone willing to share send PM.
Thanks

[adriansto]

There is a sw without scanning option ?

What version do you need ?

[bojans]

3.98.50 and 4.98.50 are without scanning.

I'll check tomorrow on my other machines what's the version with scanning option.

[adriansto]

3.98.50 and 4.98.50 are without scanning.

Wrong answer !
3.98.50.xxx and 4.98.50.xxx include code for scanning option. Always WCPro has scanning code built on nc software.
2.98.50.xxx is without scanning.

[bojans]

Wrong answer !
3.98.50.xxx and 4.98.50.xxx include code for scanning option. Always WCPro has scanning code built on nc software.
2.98.50.xxx is without scanning.

Tried both versions, but didn't get scanning option.
As I remember you sent me that software long time ago, and I was sure it had scanning .
Right now on optional services I have network accounting.

[adriansto]

If the sw is from me then it has scanning code.
But there is two types of nc controller. One for WCM machine, requires 2.xx.xx sw version and dont have IPA Pwb. Another is for WCP and works with 3.xx.xx sw version, have IPA and st least 96Mb of RAM.
Can you send me by email config report from machine that not have scanning option ?

[bojans]

It was M series of machine.

Adi thanks. You are helpfull as always