Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Jul 2012
    Posts
    8
    Rep Power
    0

    Windows 7 driver for Document Centre ColorSeries 50

    Does anyone know of a good driver for Windows 7 driver for Document Centre ColorSeries 50 (64 bit) That will allow to select bypass tray? Has a splash FU2 rip


  2. #2
    Junior Member
    Join Date
    Jul 2012
    Posts
    8
    Rep Power
    0

    Re: Windows 7 driver for Document Centre ColorSeries 50 / Doc 12

    Found a solution that seems to work so far installed a Phaser driver 64 bit then replaced/and renamed the DOC12 PPD file and renamed what the Phaser PPD file was. Now I can print thick 12x18 stock using bypass in Windows 7 to a Document Centre ColorSeries 50 / DOC12

    Seems to work with no issues so far.


  3. #3
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    298
    Rep Power
    23

    Re: Windows 7 driver for Document Centre ColorSeries 50

    I made this one myself; It is no certified, but works fine:

    Index of /Printers/Xerox DCS50

    It is 64bit only.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here