xerox wide format 8825

[walidcharifi]

hi friendsi have a problem with 8825 wide format a deletion in copy help me

[walidcharifi]

Picture 001.jpgPicture 001.jpg

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[technogeek2009]

This is a very weird defect for an 8825. I have been working with these products since they were introduced and not seen something like this. Having said that, I would be inclined to think about the following:

Do you see this problem when feeding paper from more than one tray? If not, try another roll of paper.
If it occurs with more than one roll or size of paper, check the "Media Transport to Drum Spacing" adjustment.

[walidcharifi]

This is a very weird defect for an 8825. I have been working with these products since they were introduced and not seen something like this. Having said that, I would be inclined to think about the following:

Do you see this problem when feeding paper from more than one tray? If not, try another roll of paper.
If it occurs with more than one roll or size of paper, check the "Media Transport to Drum Spacing" adjustment.

"Media Transport to Drum Spacing" adjustment..?????????????????????????

[technogeek2009]

The adjustment is in the manual. Without the manual, and basic knowledge about working on the machine, there is little hope of performing this adjustment.

[walidcharifi]

The adjustment is in the manual. Without the manual, and basic knowledge about working on the machine, there is little hope of performing this adjustment.

help
help
me
plz

[AUS XEROID]

I have had that problem before, make sure that the back up plates under the fabric guide are seated correctly. It could also be that the fabric guide is worn. Do you also get blurs in the first 100mm of a drawing?

[copytech200X]

pls chk fabric guide plate a and b for wear and media guide as well.