Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2013
    Location
    richfield
    Posts
    118
    Rep Power
    23

    docucolor 260 im taking any 077-118 and 077-330 solution suggestions

    cleaned the three dulpex sensors.
    cleaned the inverter sensors.
    cleaned all the rollers.
    path is clear.

    cleaned registraton sensors and rollers.

    Ideas?

    Single side has NO problems.
    only duplex.. the fuser exit switch wouldnt be an issue.. would it? 20 lb paper 8 1/2 x 11 long feed

  2. #2
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    327
    Rep Power
    37

    Re: docucolor 260 im taking any 077-118 and 077-330 solution suggestions

    Are you sure about the fuser exit sensor? I have had them partly fall off and cause similar faults because of the bend in the paper depending on its path.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Aug 2013
    Location
    richfield
    Posts
    118
    Rep Power
    23

    Re: docucolor 260 im taking any 077-118 and 077-330 solution suggestions

    Quote Originally Posted by Jake2o View Post
    Are you sure about the fuser exit sensor? I have had them partly fall off and cause similar faults because of the bend in the paper depending on its path.

    Problem apparently fixed. It turns out that we physically had to bend the bottom plate area 2(duplex transport) so that the rollers would make better contact with the backer rollers. Thanks for your input. I will be sure to check the fuser exit switch next time.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here