Hi chaps,
Getting the above fault when copying from trays 5 & 6. Machine just stops and doesn't even attempt to copy.
I've checked the fuses/voltage on the HCF PWB and they're fine.
Anyone had this?
Many thanks.
Hi chaps,
Getting the above fault when copying from trays 5 & 6. Machine just stops and doesn't even attempt to copy.
I've checked the fuses/voltage on the HCF PWB and they're fine.
Anyone had this?
Many thanks.
What is your machine configuration ? Tray 6 =OHCF ?
Fiery or Creo ? From tray 1-4 everything is ok ?
this is somthings to do with the firmware ..i have this problem before oh you can try change the mcu ,,,
Bookmarks