Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    103
    Rep Power
    24

    xerox wc pro 35 scaner initial fail scaner error

    xerox wc pro 35
    1.error code 14-110
    copy and scaner unavailable
    is that scaner sensor error
    2. document handler unavailable ---
    two messages shown on screen
    second message always shown on message
    the reason is ?? we put some paper on the top of machine
    any advice are welcome

  2. #2
    Service Manager 5,000+ Posts
    xerox wc pro 35 scaner initial fail  scaner error


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Thumbs down Re: xerox wc pro 35 scaner initial fail scaner error

    Do you think that posting this twice is going to get you an answer any faster?

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    103
    Rep Power
    24

    Re: xerox wc pro 35 scaner initial fail scaner error

    Quote Originally Posted by JustManuals.com View Post
    Do you think that posting this twice is going to get you an answer any faster?
    sorry , computer running slow
    hit twice

  4. #4
    Field Supervisor 500+ Posts livewire's Avatar
    Join Date
    Sep 2011
    Posts
    606
    Rep Power
    32

    Re: xerox wc pro 35 scaner initial fail scaner error

    Hi, check here:
    WC M55 fails to initialize

  5. #5
    Leodis_UK
    Guest
    Sounds like the scanner pwb has failed. Needs a qualified engineer as the new scanner pwb must be fitted in exactly the same place as the old one. Only alternative is to replace the whole scanner. This only affects the 32-38ppm mfp's as the resistors burn out.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    103
    Rep Power
    24

    Re: xerox wc pro 35 scaner initial fail scaner error

    Quote Originally Posted by pc123321 View Post
    sorry , computer running slow
    hit twice
    don't know why the message shown on the screen for 3 days
    this morning still there ,afternoon turn it off and then restart it
    error message are gone like nothing happen

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Aug 2010
    Location
    Gaborone
    Posts
    73
    Rep Power
    28

    Re: xerox wc pro 35 scaner initial fail scaner error

    There are few possibilities but depending what you wrote, it looks like your CCD PWB has "back loop" ballast resistors burnt out(5v gen.). Original ones -3x 10 ohms 0.125w should be replaced by 0.5w ones. On the other side of PWB some times you have a 131 0hm surface mounted R that is gone too (collateral damage)- replace it with available one ( chosen from E12 130 ohms 0.125w would fit ), damaged traces should be repaired also! The chances are about 65%. If you feel uncertain don’t try it. The easiest way is to replace the whole scanner!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here