Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 37
Toner reset device
Does anybody know of a device that can reset toner chips for DC250's and DC5000's. It is not worth it for us to buy the chips because by the time we have bought the chips and the toner to put in the cartridges we might as well just buy whole cartridges off ebay. In addition because we lease the machines we would go through a hell of a lot of chips.
-
Field Supervisor
500+ Posts
- Rep Power
- 37
Re: Toner reset device
you dont need the chipsand also I wouldnt by generic junk
-
Senior Tech
250+ Posts
- Rep Power
- 37
Re: Toner reset device
We've been refilling toner cartridges for DC12's, 2045's 5252's and 6060's for years. We have also made them up for the 5000 and never had a problem with either image quality or early failure but because we lease them we need the chip to show our customers how much toner is left.
I am guessing that it is just a basic RFID device but without knowing the make of the chip it is difficult to know which writers will work.
-
Field Supervisor
500+ Posts
- Rep Power
- 37
Re: Toner reset device
Where do you buy the toner?
-
Senior Tech
250+ Posts
- Rep Power
- 37
Re: Toner reset device
Zhuhai Warmth Electronic Co. It is perfectly good toner, we mix it with developer in the amounts specified by xerox and it works fine. At one point we were running 26 DC12's and 8 production class machines off it without problems.
-
Field Supervisor
500+ Posts
- Rep Power
- 37
Re: Toner reset device
how about for the 252 and 550 and 700 ;sthe machines you listed are obsolete in the USthanks
-
Senior Tech
250+ Posts
- Rep Power
- 37
Re: Toner reset device
The same company. There are only 2 types of toner if you discount the high gloss stuff.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks