Thanks:
0
Likes:
0
Dislikes:
0
-
Xerox Copycentre C128
Hi,This machine star coping very sharp and good quality copies after a Toner Density adjust.After a couple of copies it star to make lighter copies, at the end, only it made almost blank output.I run the TD adjust again and the same thing happens, good quality copies, more lighter copies and after some time, almost blank copies.Note: I replace the imaging unit and the same failure continue.Note: Toner Cartridge is New and Xerox original, I replace it before the machine start to fail.Any suggestions?Thanks in advance.
-
Trusted Tech
50+ Posts
- Rep Power
- 23
Re: Xerox Copycentre C128
look at the toner hoper motor when during printing is the motor move after few copy ...
-
Re: Xerox Copycentre C128
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks