fuji xerox colour problem

[Hong1007]

hi all,

i hv 1 machine fuji xerox apc4300 where print colour then come out double image....
i already change the laser unit,drum unit and itb Belt unit,oso same the problem
got any solution from this???

thanks!IMG_1211.jpg

[Exok]

You replaced parts but have you run the calibration adjustments? Go through the service manual to see what adjustments you need to run after replacement of the parts you put in. It looks like you need to run a color registration adjustment to align the color toner placement on the IBT. I had a WC 7435 recently with the same problem and running an auto color registration adjustment was all it needed.

[Hong1007]

You replaced parts but have you run the calibration adjustments? Go through the service manual to see what adjustments you need to run after replacement of the parts you put in. It looks like you need to run a color registration adjustment to align the color toner placement on the IBT. I had a WC 7435 recently with the same problem and running an auto color registration adjustment was all it needed.

where to colour adjusment aligment???

[copytech200X]

go to UI diagnostics and look for MAX setup and run through and u need service manual to do so....good luck