Xerox 560 - Nvm to reset fuser

[ruimestre]

I need some help my machine (xerox 560) is showing a message to order a new fuser but I have plenty of them (fusers) used but in great condition.
Is there any Nvm read write solution to reset the fuser counter?

Thank YOU all in advance

cheers

[Exok]

You can reset the fuser by replacing the thermal fuse located under the top cover (4 screws). The thermal fuse is rated at 93 deg C. Wait for the fuser to cool down, remove the old fuse and install the new one. When the fuser warms up above 94C, it will pop the fuse and reset the fuser back to 100%. It may take some time (100 or more copies) before it reports 100%.

[ruimestre]

Thank you
Will do that
But I also thought that there was a nvm to reset it.

Thanks a lot.