Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: 7345 LCQ

  1. #1
    Technician denden4h's Avatar
    Join Date
    Mar 2006
    Posts
    31
    Rep Power
    37

    7345 LCQ

    Have a WC-7345 that the customer had an issue with the A4 drum which has turned into a nightmare. The guide that allows the drum to slide in and out got bent and tore the transfer belt. I fixed the guide and replaced the belt. Now the unit has light copy quality. It originally started with black, so I replaced the developer and the 2nd transfer roller (message calling for that). The density on the transfer belt is good, but the image is not transferring well. I have tried to do all the alignments and adjustments, but most of them fail. the Fine and rough skew adjustments show fail in the others column, but no where else. The NVM Initialize does not work with the IIS extension, it fails. I do not have PWS software for this model, so I can't do anything to connect to the unit. If anyone has any advice, I would appreciate it .

  2. #2
    Service Manager 1,000+ Posts
    7345 LCQ

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: 7345 LCQ

    IQ22 procedure from Chapter 3 - service manual.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here