Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    DC 5000 jams with 9-120

    davidj7's Avatar
    Join Date
    Jan 2009
    Location
    india
    Posts
    1,112
    Rep Power
    44

    DC 5000 jams with 9-120

    Hi
    My dc5000 is showing continuous paper jam with any media with the jam code 9-120 in PWS .

    The paper jams either just above the 2nd BTR or on the first vaccum belt.the transferred image on paper shows slight mis registration.

    I checked all the sensors in registration assy, 2nd btr and on vaccum belts.

    Rest all looks fine to me.

    Any suggestions on what I am missing?
    a machine is only as good as your tech : source:screwtape ; the scary one

  2. #2
    Service Manager 1,000+ Posts
    DC 5000 jams with 9-120

    davidj7's Avatar
    Join Date
    Jan 2009
    Location
    india
    Posts
    1,112
    Rep Power
    44
    Well surprise surprise. Today when I checked the sensors again in pws v transport sensor 2 doesn't change.yesterday when I checked the same it was working fine. Well I replaced the sensor,no luck. Tomorrow I will be interchanging the BGM pwb and lvps2 from another machine. I am sure the wiring is okay as nothing has been disturbed band the problem cropped up in between a job run.

    If I have overlooked anything do let me know. Fingers crossed for now

    Sent from my Nexus 5 using Tapatalk
    a machine is only as good as your tech : source:screwtape ; the scary one

  3. #3
    Service Manager 1,000+ Posts
    DC 5000 jams with 9-120

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: DC 5000 jams with 9-120

    Check again the registration assy

  4. #4
    Service Manager 1,000+ Posts
    DC 5000 jams with 9-120

    davidj7's Avatar
    Join Date
    Jan 2009
    Location
    india
    Posts
    1,112
    Rep Power
    44

    Re: DC 5000 jams with 9-120

    I put the entire feeder unit , registeration assy, fuser , v belt transport all into another DC5000 and it works perfectly. Changed LVPS 2 . So i am thinking IO pwb .

    Could it be anything else ? just thinking i dont want to spend too much ...................
    a machine is only as good as your tech : source:screwtape ; the scary one

  5. #5
    Service Manager 1,000+ Posts
    DC 5000 jams with 9-120

    davidj7's Avatar
    Join Date
    Jan 2009
    Location
    india
    Posts
    1,112
    Rep Power
    44
    It was just toner which fell on the connector in the rear of the machine. Cleaned it and .problem solved

    Sent from my Nexus 5 using Tapatalk
    a machine is only as good as your tech : source:screwtape ; the scary one

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here