Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    5655 with 10-120 error

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    5655 with 10-120 error

    Ever see a 10-120 code on a xerox wc5655? Replaced fuser twice and reverse section twice and code still happens!

    Any thoughts?

    Kelly

  2. #2
    Field Supervisor 500+ Posts Exok's Avatar
    Join Date
    Jun 2011
    Location
    Edison, NJ
    Posts
    750
    Rep Power
    39

    Re: 5655 with 10-120 error

    10-120. The lead edge of the paper failed to reach the IOT exit sensor within the correct time after the trail edge at the fuser exit switch for an inverted sheet.

    Have you tried to make a copy in non-inverted mode?

    Have you followed the RAP?

    Not sure why you replaced the fuser. Sounds like the fuser is working fine. First thing I would do follow the RAP.

    Enter dC330 code 10-120 IOT Exit sensor check. Press start. Manually actuate the sensor. Does it change state?

    No? Follow the signal from the sensor back to the IOT PWB.

    Yes? enter dC330 code 10-050 inverter nip solenoid. Press Start. Solenoid energizes?

    No? Follow the signal from the solenoid back to the IOT PWB.

    Yes? Enter dC330 code 10-045 inverter path solenoid. Press start. Solenoid energizes?

    No? Follow the signal from the solenoid back to the IOT PWB.

    Yes? Enter dC330 code 10-030 inverter motor. Press Start. The Jam Clearance knob 2B is stationary and the motor can be heard?

    Yes? Check the following components:
    Idler roll, upper baffle, double exit nip roll, exit shaft assembly, nip split shaft assembly, Fuser drive gear on the main drive assembly, check the IOT exit sensor mounting bracket on the nip roll guide, the bracket holds the IOT exit sensor in the correct position.

    No? The jam clearance knob 2B rotates counterclockwise?

    Yes? Install a new inverter motor driver PWB

    No? Follow the signal from the inverter motor. Replace motor , replace motor driver pwb.

    If that does not help, there are a ton of eureka tips for this code as well with various fixes.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,639
    Rep Power
    57

    Re: 5655 with 10-120 error

    have you tried inverter drive PWB?

  4. #4
    Service Manager 1,000+ Posts
    5655 with 10-120 error

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: 5655 with 10-120 error

    Turned out two bad fusers !

  5. #5
    Field Supervisor 500+ Posts livewire's Avatar
    Join Date
    Sep 2011
    Posts
    606
    Rep Power
    32

    Re: 5655 with 10-120 error

    If possible try to change the LVPS and base module.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here