Xerox Docucolor 242 Adjust Image Position Issue HELP!

[BelloPrints]

Hello all! I was wondering if anyone could really help me out with this issue I would greatly appreciate it!

Every time I print, the image comes out of the registration.

20140410_173745.jpg
(This was printed via the Bypass Tray 5) I've also tried the rest of the trays options but they also come out of registration side by side.


I was basically messing around with the Xerox 242 settings, I was adjusting the image position via the Login/Out > System Settings > Common Settings > Maintenance > Adjust Image Position. And this is what I see.

Attachment 24733 Attachment 24734 Attachment 24735


The settings I currently have are set to width x 0.3780.
20140410_173657 copy.jpg20140410_173706 copy.jpg

And every time I try to adjust the settings to move the image I get this.

20140410_173719.jpg

It says I'm unable to start. I can't seem to save any new settings I make.

My question is how can I resolve this "unable to start" issue. Or is it possible to change the settings back to default like it was before?

I would greatly appreciate it if someone can help me out, I would call a technician but he's gonna charge $100 an hour. I don't wanna be charged for something I might able to fix myself. Thanks!

[BelloPrints]

Bumping.

Please if anyone can assist me or give me any tips.

-Thanks

[adriansto]

If you have technical skills enter to service mode and perform registration series procedure.
iF not, then is better to pay the tech guy.

[BelloPrints]

I managed to fix it, but the Bypass Tray is still not registering.

[BelloPrints]

So I went into service mode. Here's what I get now.

This was before:
20140410_173745.jpg

This was after:
20140411_132309.jpg