info machine choice

[livewire]

There are two ways to check the meter.

WorkCentre 5645/5655 Online Support for How To Read the Meters (Billing Counters) | Xerox USA

[Enzo]

Sorry friend but I already know these methods. Unfortunately, in this way I can not seem to know the real copies made!In a few options in the memory nvm it is possible to know the really copies made

[xcopytech]

As I told you before, if someone replaced batter earlier then you can not know real copy number.
If battery is replaced then nvm is reset to deful and copy number is reset to 0.

[Enzo]

But in my opinion has not changed the battery. It was only brought back several copies of the counter and I want to discover the real copies made.

[livewire]

these methods shown in the link below.
What displayed the total Impressions counter?

[Exok]

There is only one total counter. If it has been blanked (by removing the battery from the software module for a period then reinstalling or installation of a new software module) or changed (by installing a software module from another machine) there is no way of recovering the original counter data.

[Enzo]

Ok I have understood. I was hoping that there was a method to know the real copies made from the machine. I for example, I have a dc440 and by nvm property I can change the counter in order to make show a other number than that real.

[xcopytech]

So, what you want to know?
How to change total counter?

Is that your question?

[Enzo]

Exactly! Basically I bought a used machine with 60k copies but in my opinion has done a lot more copies. I want to check this.

[livewire]

Check the Service History in the Machine Log Book.
Of course if there is.

log.jpg