WC 6400 Lights flashing

[InterfaceP]

Hello everyone,

I have a couple of Workcentre 6400's and they are all doing the same thing.

Upon starting up the unit, the screen displays the green and white with "Please wait.. Machine is starting up" All the hard button LED's flash once and turn off. Also the touch screen turns off and on. It repeats this until you turn it off, never starting.

Any help would be appreciated.

[dorez]

Easier fix.... Maybe.. Check your e-mail

[Scarecrow]

Sooo Dorez, Would you like to share the solution?

Thanks.

Glenn

[dorez]

Sooo Dorez, Would you like to share the solution?

Thanks.

Glenn

I wasn't completely sure of the fix, so I sent him the service manual..

[adriansto]

Hello everyone,

I have a couple of Workcentre 6400's and they are all doing the same thing.

Upon starting up the unit, the screen displays the green and white with "Please wait.. Machine is starting up" All the hard button LED's flash once and turn off. Also the touch screen turns off and on. It repeats this until you turn it off, never starting.

Any help would be appreciated.

Must be hdd inside but with the stupid security law .......


Sent from my V3-E using Tapatalk

[InterfaceP]

Must be hdd inside but with the stupid security law .......


Sent from my V3-E using Tapatalk

I took the HDD's (there are 2) from a working one and had some success in non working units. But most of them have the flashing lights issue.

In regards to the non working ones. The ones with no hardware issues will need the SYS SW reloaded. Is there some security wall I'm going to be beating my head against?