Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    patalaide
    Guest

    Question 062-396 error on a xerox dp cm505da?

    I have 2 machines with the same error. A bulletin points to a CCD cable connection failure.
    I've managed to reset them by reseating the ribbon cables on both the IIT and the ESS boards, but both have recoded once power cycled. The lamp fails to light up each time they coded
    Am I looking at boards next?

  2. #2
    patalaide
    Guest

    Re: 062-396 error on a xerox dp cm505da?

    Have since changed the IIT Board and cleaned connectors with contact cleaner w/out change.
    I am going to replace the ribbon (flat) cable connecting the CCD and IIT next.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here