004-347 After belt replacment

[bmt_hr]

Hi


After transfer belt replace I have that error code 004-347 !!!?!!!
Machine is WC 7346..

thanks

br

[adriansto]

Hi


After transfer belt replace I have that error code 004-347 !!!?!!!
Machine is WC 7346..

thanks

br

Check again how the belt was installed especialy belt edge sensor and belt tensioners.

[bmt_hr]

Check again how the belt was installed especialy belt edge sensor and belt tensioners.

Edge sensor is ok postion (when I make few color copies then he make error), but what is the belt tensioners?

[adriansto]

Edge sensor is ok postion (when I make few color copies then he make error), but what is the belt tensioners?

The elements who make the belt to be stretched.

[bmt_hr]

The elements who make the belt to be stretched.

My problem still stands on that machine. Check it all, but I can no longer find fault ..

[Exok]

This error indicated that the IBT edge sensor does not detect that the Transfer Belt edge is in the correct position.

If this error was not present prior to replacement of the current Transfer Belt:

Remove the IBT belt assembly.
Locate the IBT edge sensor and make sure it is connected and clean.
Release the belt tension.
Make sure the belt is perfectly centered on its rollers. (same distance away from the front and rear of rollers it is mounted on)
Reapply the belt tension.
Reinstall the IBT assembly.