510dp problem!!!!!!!!

[walidcharifi]

hi freinds
my 510dp wideformat problem
photoCAM00006.jpgCAM00016.jpgCAM00006.jpgCAM00007.jpgCAM00008.jpgCAM00009.jpg


video
<br>

[xcopytech]

did you check pins and grid on charge scorotron?

[walidcharifi]

did you check pins and grid on charge scorotron?

salvation
thank you for answer
I checked but still same problem

[Iowatech]

I am the newest of noobs here for Xerox, and also I currently have seen exactly zero Xerox wide format printers.
For what it is worth though, based on what I've seen on the machines I have worked on for some time, there most likely is a buildup of toner in the paper path somewhere before the fuser. From what I've seen it is usually is somewhere around the drum, and if you are able to vacuum that area with a vacuum that can handle toner, and can do that without damaging the drum (wide format drums are very expensive to replace) it will probably provide you with temporary relief. Then you just have to find out why that toner was there.

[walidcharifi]

I change the bar erase another machine
and solve the problem
but it is the black line is al rightIMG0553A.jpgIMG0554A.jpg

[tonerspot]

u have to clean charge grid and corotron, or replace it.

[walidcharifi]

the problem is back againPicture 001.jpg
§§§§§§§§§§§§§§!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!
i clean the machin
drum / detack corotron / unite developer /bias transfer / Scorotron Pin / Scorotron Grid.......

[xcopytech]

replace charge scorotron.

[Tek_services]

developer unit inside, look for toner blade

[walidcharifi]

replace charge scorotron.

hi ... thanks
i replace charge scorotron ..... not resolved....!:§!!


just the first page
but other pages is good