Paper jam problem with xerox 5645

**Enzo** · 10-08-2014

hello friends. I have a paper jam problem with my xerox 5645.
I enclose pictures of the problem.
The paper is jammed in the area1.
A technician told me that the problem is caused by the clutch (CL08-070).
I changed it and the problem is solved. At first, the paper is still jammed, but after a little time the machine worked again.
After 30 thousand copies, the problem has come back!
Now I ask you ... is again the clutch? The clutch that I bought is new, not used!
It may have broken yet? Is there some other reason? Thanks so much.
paperjam1.jpg paperjam2.jpg service manual - workcentre 5645 clutchp.jpg

**Lee2475** · 10-08-2014

looks like its catching to me looking at the top of the paper, Have yot tried it from another paper tray?

**Lee2475** · 10-08-2014

Also give me the fault history if your sure its not catching on anything in the paper path.

**Enzo** · 10-08-2014

yes, friend! each tray to give the same problem!
My fault history indicates only a problem with the paper sensors. But I have also excluded this problem as I have also changed the entire Group!

**Lee2475** · 10-08-2014

Give me what codes you have and I can have a look on searchlite I've never had a problem with the sensors on the registration before only the one down the very bottom of the left side, does this do it every copy? You haven't got any codes for hvps? As I've had the same thing and it's been that, soon as it tries to put the image on the drum it faults out the paper stops about there, just a thought.
Only thing to do it run component control and see if the sensors switch and the rollers turn under abit of load.

**livewire** · 10-08-2014

Try to make copy from bypass.

**Enzo** · 10-08-2014

Originally Posted by livewire

Try to make copy from bypass.

The sheet from bypass will not start!

**Enzo** · 10-09-2014

Originally Posted by Lee2475

Give me what codes you have and I can have a look on searchlite I've never had a problem with the sensors on the registration before only the one down the very bottom of the left side, does this do it every copy? You haven't got any codes for hvps? As I've had the same thing and it's been that, soon as it tries to put the image on the drum it faults out the paper stops about there, just a thought.
Only thing to do it run component control and see if the sensors switch and the rollers turn under abit of load.

Now I do not remember the code number but I have the service manual and it indicates a problem with the sensors. I've already tried to run a check on the components, but it was positive