5675 external print controller beeps

[mrfuser]

Client has a print controller that won't boot and just beeps 3 times over and over.


any ideas?

thanks


kelly

[Lee2475]

I have had this over the years and it's always been duff memory, easy to change.

[mrfuser]

Thanks. I am getting constant three beeps over and over

[Lee2475]

That's it, I've come across this a few times now. Everything it's been this, if you try and altboot it just sits there and does nothing.

[mrfuser]

Swapped memory and beeps stopped but still only boots to 75%. Swapped power supply also to try with same result.

any ideas?

kelly

[mrfuser]

With all the swaps I put an old hdd in and when I realize that I put correct one back and all is good.

had two of these go down 30 miles apart! One was memory bad and other was power supply! Sheesh!

[Lee2475]

Ideal, I've done that before. Got bits everywhere, never had a psu give beeps yet, I'll remember that in future.