Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    imdabs
    Guest

    Question DC240/DC242 CREO system software needed

    Hi All,

    I have couple of DC240/242 and their CREO HDD has failed, So i need to replace HDD and put new system software..

    can Anyone help me with that??
    Either how to source a CD with Sytem software or copy system software from a good machine...

    Thanks in advance for your help.

    Regards

  2. #2
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    Dallas/Fort Worh, TX
    Posts
    487
    Rep Power
    27

    Re: DC240/DC242 CREO system software needed

    Stand alone or bustled?

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Feb 2009
    Location
    Rogers, Arkansas
    Posts
    466
    Rep Power
    35

    Re: DC240/DC242 CREO system software needed

    I don't believe there are 2 different versions of creo. It is all the same type. The only difference is they sometimes mounted it to the back of the machine versus to a table monitor and keyboard assy.

  4. #4
    imdabs
    Guest

    Re: DC240/DC242 CREO system software needed

    Quote Originally Posted by InterfaceP View Post
    Stand alone or bustled?
    bustled

  5. #5
    Technician alibear57's Avatar
    Join Date
    May 2013
    Location
    Methil
    Posts
    14
    Rep Power
    23

    Re: DC240/DC242 CREO system software needed

    Don't know if I'm too late with this, but I have a DC242 with EX260 Fiery. I know there's a Fiery install folder on the Fiery hard drive but not sure of copying that onto a CD/DVD would be sufficient for your needs. If you have the know-how on what to do with this, if you, or anyone else, could send me instructions, I'd be happy to burn it onto a disc and send it to you if that would help.

  6. #6
    Technician alibear57's Avatar
    Join Date
    May 2013
    Location
    Methil
    Posts
    14
    Rep Power
    23

    Re: DC240/DC242 CREO system software needed

    I replied to this thread earlier but it doesn't seem to have appeared on here. In the earlier reply I said that I had a DC242 connected to a Fiery EX260. I discovered a folder inside the C drive which contained the installation files for the Fiery software. I've used it to reinstall the Fiery software and it worked. If you, or anyone else, knows how I can burn the appropriate files from there onto a CD/DVD, then I will send you a copy of it - if you've not already got it from somewhere else.

  7. #7
    imdabs
    Guest

    Re: DC240/DC242 CREO system software needed

    Quote Originally Posted by alibear57 View Post
    I replied to this thread earlier but it doesn't seem to have appeared on here. In the earlier reply I said that I had a DC242 connected to a Fiery EX260. I discovered a folder inside the C drive which contained the installation files for the Fiery software. I've used it to reinstall the Fiery software and it worked. If you, or anyone else, knows how I can burn the appropriate files from there onto a CD/DVD, then I will send you a copy of it - if you've not already got it from somewhere else.
    thanks for trying to help.. but I am not looking for fiery (EFI) software... I am looking for creo software, Regards

  8. #8
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    Dallas/Fort Worh, TX
    Posts
    487
    Rep Power
    27

    Re: DC240/DC242 CREO system software needed

    I ran into a similar problem and searched for a solution for quite some time. I have the Creo disc but they dont contain a boot file.

    The solution that was given to me was to obtain an image of a working HDD and copy it to the HDD inside your Creo.

    I hope this helps.

  9. #9
    Junior Member
    Join Date
    May 2020
    Location
    Gr
    Posts
    9
    Rep Power
    0

    Re: DC240/DC242 CREO system software needed

    I have creo on my Xerox and my hdd is dead.
    Can you please help me?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here