Xerox DC12 14-376 error code

[ewalker]

The machine was fine yesterday, and this morning when we turned on this code appeared 14-376. Anybody knows what´s that? The machine was with a problem with the copy mode, but was printing perfect.

Thanks I would be really glad if someone helps me with this.

Ewalker

[xcopytech]

Check connectors on Halftone PWB if ok then replace Halftone PWB.

[ewalker]

Does anybody here has the Service Manual and could scan the Halftone PWB part for me? I´m in Brazil with 0 xerox support for this machine... Good machine though.

[xcopytech]

Manuals 4 You - Copier-Printer-Fax Manuals etc

Paul have this SM
But if you need to replace halftone pwb you will need laptop with xerox pws and diagnostic software for this machine because when replace halftone PWB you need to do serial number sinhronization.

This can be done only with DC 12 diagnostic software.

[ewalker]

THanks a lot!!!

[xcopytech]

if i remember good, check fuse F4 on power distribution PWB,
if this fuse is blown machine will show 14-376 fault code.

if fuse is ok, as i told you check connectors on halftone PWB.

[ewalker]

Fuse F4 and the others are ok... how can I find the Halftone PWB? Where its located? I read on every board and didnt find the word Halftone... Thanks for all the help! If it not too much do u have the Halftone PWB part number?

[xcopytech]

If your machine have scanner then you have to remove it, then remove one metal plate and then near ROS unit you have halftone, VSEL and VSEL extension PWB.

If machine do not have scanner then just remove side covers, then top cover and plate and you will see Halftone PWB.

[ewalker]

Man, you´re good!! thanks!! I´ll study and find this problem! I know I´m asking too much, but if it´s not difficult for you to find the Halftone PWB xerox part code for me... thanks! thanks! a lot!

[xcopytech]

160K46352 HALF TONE PWB

but remember when replacing this PWB you must have laptop with xerox pws so you can done serial number synchronization.

even if you get new pwb you will get error when install it.