Hi Guys,
This seems to be happening to me every 6 to 10 prints, its on 120gsm Colotech Gloss Coated Paper.
Has anyone ever had the same problem or have advice on how to solve this. Image of defect below.
printdefect DC250.jpg
Thanks,
Damien
Hi Guys,
This seems to be happening to me every 6 to 10 prints, its on 120gsm Colotech Gloss Coated Paper.
Has anyone ever had the same problem or have advice on how to solve this. Image of defect below.
printdefect DC250.jpg
Thanks,
Damien
A3 or A4 paper size ?
I've seen this on DC 12, but never on DC 250.
Looks like you have missing piece from belt.
If the missing part of the image has the same shape the you must check for a piece of paper or something else in the belt area. Unscrew two bolts, pull out the IBT drawer and check. Also check in the 2nd BTR area.
If you dont find anything the try to change the paper stock.
Well I found the problem. See Image. Now to replace this. Are they expensive?
IMG_2067.JPG
Bojans was right !
You have a hole in the belt
Queer things do happen....
Bookmarks