NVM

[Reeves]

How do I modify the protected NVM value on machine control nvm 03-012 prod cong speed the machine is displaying machine id speed invalid when I go to nvm its showing speed 45 but the machine is wc 5655 now to modify its asking for a password what is the password

[bojans]

How do I modify the protected NVM value on machine control nvm 03-012 prod cong speed the machine is displaying machine id speed invalid when I go to nvm its showing speed 45 but the machine is wc 5655 now to modify its asking for a password what is the password

Check PM

[colorkit]

Check PM

i have xerox 57 series with same problem.
please send me pwd.

[techepet]

Check PM

Hi I have the exact same problem and machine is asking for protcted nvm password when i try to change the value. Could you provide assitance? Thanks!

[Enzo]

Instead, I can change the values ​​but the machine still does not work!

[techepet]

What password did you use?

Instead, I can change the values ​​but the machine still does not work!

[Enzo]

I do not know if I can say the password, but it works. I saved the nvm data from a same running machine, I loaded them into my machine, but it continues to show me the error message.

[Enzo]

hi friends. my machine (5645) makes the scans too light. I can increase the darkness? (directly NVM)

[amr_1_4]

i have the same problem and i need the password to move 5745 to 5755...
and another problem .. every time i power up the machine the controller appear offline and should to make manualy onlin
please Help
thanks

[amr_1_4]

I do not know if I can say the password, but it works. I saved the nvm data from a same running machine, I loaded them into my machine, but it continues to show me the error message.

please i have the same problem can i get the password ??