Fuji xerox wc7245 error code 006-381

[Hong1007]

Hi all friend,

I hv 1 machine fuji xerox wc7245 error code 006-381,
That is a ROS ( laser ) fault. But where area i want to check??

Thanks

[Exok]

I don't see that error code in the edoc.

061 codes are ROS faults. I don't even see a 61-381.

[adriansto]

I don't see that error code in the edoc.

061 codes are ROS faults. I don't even see a 61-381.

Exok, 7245 is from WC73xx machine class not from WC7242

Check PJ 401 -B20 from MCU pwb/ Must have 5 volts between that pin and machine ground. If not then MCU = defect.
If ok check the wire between PJ 528, PJ 517 pin 1 from ROS to same PJ 401 from MCU.
IF ok then change the ROS

[framza1]

...