Thanks: 0
Likes: 0
Dislikes: 0
I work on Ricoh and Kyocera copiers but a customer asked me to look at this while I was in her office.
They already tried to replace the maintenance kit but no change.
Oh and also the display is blank
Any ideas?
20141217172745575_0001.jpg20141217172756683_0001.jpg
There is something between the drum and the head?
How would I access that to check?
Remove display cover (no screws), remove left and right cover (2 screws in the back), remove exit cover and ink - loader (attention: 2 connector inside).
check face of printhead and wash with alcohol........after market wax?
You never realize how cheap a professional is until after you let an amateur do it....and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
Posting Permissions
Reply With Quote
Bookmarks