DC6060 Metal Plate under IBT Belt

[Kaz73]

Hi, please could someone tell me the part number for the metal plate that sits under the IBT belt on a DC6060. I think the plate is there as a sheet smoother, it is held on to the IBT assembly by two black plastic fixings which on our have both broken and need replacing. At the minute when feeding paper it keeps jumping up and jamming under the IBT belt.

Any help advice would be greatly appreciated.

Kaz

[Milo Wilson]

Does it have a sensor attached to it? Can you upload a picture? If the 2 plastic brackets are broken, their part # is 003E40480. you will need to order 2. One for the front and one for the rear.

[Kaz73]

Know no sensor from what I can see, there are two black clips either side of the IBT assembly. I have attached a picture of the plate.
Thanks Milo
KazIMG_0649.jpgIMG_0649.jpg

[Milo Wilson]

Is the plate broken or the plastic pieces?

[Kaz73]

Is the plate broken or the plastic pieces?

Just the plastic pieces that attach to the side of the side of IBT draw, the little spring it still attached to the metal plate so Im guessing it is just the black plastic clips.

[Kaz73]

I found it it's a chute stopper 003E40480, thanks for your help Milo