dc-12 weird problem

[funnykishi]

Hi,

One my dc-12 when pinging at machine's IP address it respond normally (reply correctly) but sending print command from computer pinging stops and not print comes out.
I have changed networking cables
Can anyone helps me

Thanks in anticipation

Regards

Brij Mohan Sharma

[alex4alltimes]

Hi,

One my dc-12 when pinging at machine's IP address it respond normally (reply correctly) but sending print command from computer pinging stops and not print comes out.
I have changed networking cables
Can anyone helps me

Thanks in anticipation

Regards

Brij Mohan Sharma

Did you print to Port 9100 or to SMB? In both cases you must place the IP of the Fiery to the same workgroup, like MSHOME or WORKGROUP. See if you can access the HOLD queue from the Network Connections. If yes, then double click and install an instance of the HOLD queue as a printer. If no, then check the domain in the fiery and set it to the same domanin as your computer. Is your Computer running Windows 7?

[funnykishi]

Did you print to Port 9100 or to SMB? In both cases you must place the IP of the Fiery to the same workgroup, like MSHOME or WORKGROUP. See if you can access the HOLD queue from the Network Connections. If yes, then double click and install an instance of the HOLD queue as a printer. If no, then check the domain in the fiery and set it to the same domanin as your computer. Is your Computer running Windows 7?

I am printing from this machine for the last two years but before 10 days I have lost power in my shop and resulting in this problem
Yes , i can see print queue from network but printer not print anything.

I have windows xp installed in my computer.

[alex4alltimes]

I am printing from this machine for the last two years but before 10 days I have lost power in my shop and resulting in this problem
Yes , i can see print queue from network but printer not print anything.

I have windows xp installed in my computer.

Hi, Can you access Command Workstation? Can you print from there?

[funnykishi]

I can access machine from network but unable to print from anywhere.


Thanks for your reply

[funnykishi]

can anyone provide me xerox DC-12 cobra rip software and machine firmware to reinstall on my machine.

Thanks in anticipation of help

Regards

[adriansto]

Cobra 2 GoldenGate v.3, firmware7.06 or 11.50.3

[funnykishi]

I have attached previous configuration which I have saved when machine works.

Can anyone help to install cobra software and machine firmware .

My email id is funnykishi@gmail.com

any help appreciated.

Thanks

[adriansto]

I have attached previous configuration which I have saved when machine works.

Can anyone help to install cobra software and machine firmware .

My email id is funnykishi@gmail.com

any help appreciated.

Thanks

Sent you mail with what I have for DC12
Your machine is FU2 type for XC market region.

[WIWA]

Sent you mail with what I have for DC12
Your machine is FU2 type for XC market region.

Hello,

Sorry to tell Cobra is the Crabby-patties interfaces for those copiers , If you don.t want connectivity problems , use a Fiery X12 instead you can get one at E-BAY and convert you machine to a DC12 just changing few NVM's values and few adjustments did on mine and working like a charm . I you want a cobra ( not sure is still working for parts) can sell mine for 50 buck plus shipping to your destination .

hope this help,

Wiwa 72 , Gonzos build v.1.0