Hi Xerox guru,
Pls help with error code " Print engine subsystem fault 9-335" (DC5000)
Hi Xerox guru,
Pls help with error code " Print engine subsystem fault 9-335" (DC5000)
change NVM 755-808 to a "0"
Run DC330 009-124. Check if waste toner augers 1 & 2 rotate. DC330-106, check auger #1 sensor for changing high/low state. After repair, NVM 755-808 (sensor #1) must be reset to 0. I think you will need a PWS to fix this.
Bookmarks