Copier Service Tech tasked with working on all makes and models

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • bob marley
    replied
    Re: Copier Service Tech tasked with working on all makes and models

    Welcome
    if u still need help post that problem in the correct forum ( http://www.copytechnet.com/forums/konica-minolta/ )

    Leave a comment:


  • Aneurysm
    replied
    ssteph1984, thanks for joining the site.

    Leave a comment:


  • Copier Service Tech tasked with working on all makes and models

    I need help from time to time as I am trained on Toshiba and Sharp and HP but not on other makes. Right now I am dealing with a Konica Minolta Bizhub C203 that is printing hash marks on the page on prints only and in black only. Not sure if this is a registration mark that's not being cleaned off the drum or what. Typically 4 bands of 4 marks :::: :::: :::: :::: similar to that and there are 9 of the groups of 4 across the page horizontally on a LT sheet of paper in portrait orientation. the lines of marks are about 3.5 inches apart. Please help. Thanks
Working...