Ir5000 lcd blank

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • helleboys
    • Jun 2025

    #1

    Ir5000 lcd blank

    no power and lcd is blank.... why?
  • charm5496
    Service Manager

    Site Contributor
    1,000+ Posts
    • Apr 2008
    • 2387

    #2
    so the green light on the control panel is OFF?

    Did you check your outlet, breaker on the machine, was the unit operational before you got to it? Need more information.
    Accidents don't just happen. They must be carelessly planned.

    Comment

    • helleboys

      #3
      the green light on the control panel is on (green). lcd blank. machine cycle... but control panel not function

      Comment

      • kuby
        Senior Tech

        1,000+ Posts
        • Oct 2007
        • 1394

        #4
        check and clean the control panel. Remove to clean and check the contact places for good connections. I had one do the same thing, turned out to be the control panel need a good cleaning. Also check the RAM, it could be bad.

        Comment

        • krish
          Technician
          • Apr 2010
          • 16

          #5
          Originally posted by helleboys
          no power and lcd is blank.... why?
          Boot Rom or SD ROM problem. check both.

          Comment

          • charm5496
            Service Manager

            Site Contributor
            1,000+ Posts
            • Apr 2008
            • 2387

            #6
            Originally posted by krish
            Boot Rom or SD ROM problem. check both.
            BINGO!!!!
            Accidents don't just happen. They must be carelessly planned.

            Comment

            • helleboys

              #7
              now the screen is on, but at the copy after 4-5 sheets of die screen again ... oh my god.. please help me...

              Comment

              • charm5496
                Service Manager

                Site Contributor
                1,000+ Posts
                • Apr 2008
                • 2387

                #8
                first what did you replace....second where did you get the parts you did replace?

                I would double check the work you did and make sure all connections on the main controller are seated correctly.
                Accidents don't just happen. They must be carelessly planned.

                Comment

                Working...