Formax FD300 entry level folding machine

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SalesServiceGuy
    Field Supervisor

    Site Contributor
    5,000+ Posts
    • Dec 2009
    • 7830

    Formax FD300 entry level folding machine

    I have a new FD300 and I cannot get it to pull more than 2-3 sheets of paper to fold before it stops.

    I have played around with the Doc Feeder for hours trying to get this to work and have contacted Formax tech support for support.

    The three feed tires are all brand new and the paper lays directly underneath them.

    Any ideas?
  • Vincent128
    Trusted Tech

    Site Contributor
    250+ Posts
    • Sep 2015
    • 331

    #2
    Re: Formax FD300 entry level folding machine

    Originally posted by SalesServiceGuy
    I have a new FD300 and I cannot get it to pull more than 2-3 sheets of paper to fold before it stops.

    I have played around with the Doc Feeder for hours trying to get this to work and have contacted Formax tech support for support.

    The three feed tires are all brand new and the paper lays directly underneath them.

    Any ideas?
    Not sure about this particular one but all Formax's generally have the same feed setup on their folders.
    I have had a new folder require taking a small bit of mylar, bending at a 90 degree and glueing it to the lead edge of the singulator or paper would dive into the pad.

    picture of jam might help.

    Comment

    Working...