Anyone having for me a set-up guide how to configure a BH-C-284e, for SMB scanning to a MAC please?
Hans
Hans
-
β Sent from my Intel 80286 using MS-DOS 2.0
β
https://www.copytechnet.com/images/smilies/biggrin.png -
you can try this option to configure SMB using using BOX
Configure scan to SMB using BOX https://youtu.be/QtiK_T3k-iM?si=I1WYOyEh-lswc89F
In MAC click on Go>Connect to server
image.png
Enter the IP address of the printer under Server Address
If prompt for user name and password
Username: guest
Password: blank
image.png
Copier Tech Specialistβ -
With networking in a MAC environment, I'm a total noob, so please be patient with me π.
Question: If the file sharing has been set up properly on the MAC and my Windows computer is in their network, can I then test it with my Windows computer with the following path:
\\MAC\SMB (where MAC is the computer name and SMB the shared file) ?
Hansβ Sent from my Intel 80286 using MS-DOS 2.0 β
https://www.copytechnet.com/images/smilies/biggrin.pngComment
-
Yes, that's clear in between.
But....., how can I check with my Windows computer if the MAC has its file sharing and SMB turned on, if it doesn't work?
With Windows computers, I can test the file sharing by doing
\\Hans\SMB
(where Hans is the computer name and SMB the shared file)
I presume that it's the same with MAC, but like to be sure.
Hans
β Sent from my Intel 80286 using MS-DOS 2.0 β
https://www.copytechnet.com/images/smilies/biggrin.pngComment
-
You should be able to use "Map network drive" or Network discovery.Comment
Comment