MFP Alignment Chart

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • tsbservice
    replied
    We used to make own charts from blank page with 6-8 arrows drawn strategically pointing edges of paper. Worked good enough for adjusting ADFs.
    Now I always carry a couple of those that came with new Konica Minolta DFs.

    Leave a comment:


  • ihatefinishers13
    replied
    Originally posted by Hart
    I use an old chart from my Sharp rep but it's a mess.
    I forgot to ask for a full bleed at the Epson center last time I was there of theses test pages :
    https://www.precisionroller.com/prin...ter-test-page/
    Yeahhhh I'd love some full bleed prints that are professionally done. Me printing a PDF of a centering chart, even on 11x17 and cutting it down, will always be imperfect.

    Leave a comment:


  • slimslob
    replied
    Originally posted by Hart
    I use an old chart from my Sharp rep but it's a mess.
    I forgot to ask for a full bleed at the Epson center last time I was there of theses test pages :
    https://www.precisionroller.com/prin...ter-test-page/
    They also have a printed Black. https://www.precisionroller.com/ukog..._pn_51130.html

    Leave a comment:


  • Hart
    replied
    I use an old chart from my Sharp rep but it's a mess.
    I forgot to ask for a full bleed at the Epson center last time I was there of theses test pages :

    Leave a comment:


  • ihatefinishers13
    started a topic MFP Alignment Chart

    MFP Alignment Chart

    Looking for a chart that you can copy to verify the machine is copying off the glass and ADF accurately. Sharp used to have their own chart, but it's no longer produced and I can't locate it anywhere. They of course want you to use their test mode to check alignment, which is all well and good, but it would also be nice to be able to see the edge lines, center points, etc.

    What does everyone use? And is it something that we can purchase somewhere?
Working...