iRC3200 panel display blank

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Blues Guy
    Trusted Tech

    100+ Posts
    • Aug 2009
    • 216
    #1

    iRC3200 panel display blank

    Hi guys,

    Just have these problem with iRC3200. When do multiple copies of A3 size in Document Feeder just after the scanner scan the 1st original the panel display with go blank. If you try at platen glass (A3) no problem. Other size (A4) multiple copies at Document Feeder no problem.

    Any comment on these issue ?
    Tags: 1st, 200, bad, blank, copies, display, document, feeder, glass, irc, irc3200, issue, lef, left, multiple, multiple copies, original, panel, plate, power, sca, scan, scanner, size
    • ESA
      #2
      The problem is the power board. Bottom left hand corner. Look for the two wire connector on bottom rightside of that board. I have had a bad solder joint there that left me guessing if it was a power board or not. But in your lucky case you get to find out today. Yes it is power board.

        Comment

        Previous template Next
        Working...