Dear Seniors,
Can someone give me the solution for the problem described below.i have IR ADV 8105 machine with Booklet Finisher D1.After switching on,the finisher Tray will come down ,will not go up,start making sound and then error comes 540-8001.There is nothing blocking the movement of the tray,no gear damage because its movement towards the down direction is smooth,only problem comes when the tray tries to go up.
so kindly request to give suggestions and help me with the solution.Also request to share the service manual for Booklet finisher D1 if anybody is having.
How to do the sensor intensity check in 805 m/c like what we are doing in IR 7105 M/c.
Expecting the valuable suggestions asap.Many thanks in advance.
Can someone give me the solution for the problem described below.i have IR ADV 8105 machine with Booklet Finisher D1.After switching on,the finisher Tray will come down ,will not go up,start making sound and then error comes 540-8001.There is nothing blocking the movement of the tray,no gear damage because its movement towards the down direction is smooth,only problem comes when the tray tries to go up.
so kindly request to give suggestions and help me with the solution.Also request to share the service manual for Booklet finisher D1 if anybody is having.
How to do the sensor intensity check in 805 m/c like what we are doing in IR 7105 M/c.
Expecting the valuable suggestions asap.Many thanks in advance.