Hi,
have an old ir3170 which previously refused to boot and got a second one where i have exchanged the development parts (drum, itb, devel-cmyk, 2nd-external-roller) into the running machine.
After having problems with the ITB-Cleaning-Blade clutch (did not stop on the highest edge, so cleaning blade touched ITB while image formation) my printed image looks like the attached scan.
The vertical stripes seems to come from the fixing unit (klacking noises while running fixing-drum, imho flatten surface on the roller). But have no clue where the horizontal distortion comes from.
thanks in advance!
best regards,
Karl
have an old ir3170 which previously refused to boot and got a second one where i have exchanged the development parts (drum, itb, devel-cmyk, 2nd-external-roller) into the running machine.
After having problems with the ITB-Cleaning-Blade clutch (did not stop on the highest edge, so cleaning blade touched ITB while image formation) my printed image looks like the attached scan.
The vertical stripes seems to come from the fixing unit (klacking noises while running fixing-drum, imho flatten surface on the roller). But have no clue where the horizontal distortion comes from.
thanks in advance!
best regards,
Karl